Technický zdroj
CAD knihovna
Search by model number and check the available 3D or dimension resources before you build your pneumatic system.
Navigace řad
Vyberte řadu a porovnejte její modely
Konfigurátor řady
Vyberte model a prohlédněte jeho CAD zdroje
Vyberte řádek vlevo. Náhled, údaje o modelu a dostupné soubory se aktualizují vpravo.
| Model | Series size range | Guide design | CAD | |
|---|---|---|---|---|
| Ø6–Ø25 | Cross-roller guide | STEP · PDF |
MXS
MXS Cross-Roller Guided Cylinder
Verified 3D CAD model on request. Confirm the exact configuration before engineering use.
Guide design
Cross-roller guide
Series size range
Ø6–Ø25
Motion
Guided linear pneumatic travel
Mounting
Select according to application drawing
Rejstřík modelů
32 models
SC32×50
sc series
A double-acting standard cylinder with a 32 mm bore and 50 mm stroke for general automation.
SDA20×30
sda series
A compact double-acting cylinder with a 20 mm bore and 30 mm stroke for space-limited installations.
SC40×100
sc series
A 40 mm bore and 100 mm stroke standard cylinder for higher-force automation applications.
4V210-08
4v series
A 5-port directional solenoid valve with 1/8 in ports for double-acting cylinder control.
4V310-10
4v series
A 5-port, 3/8 in solenoid valve for higher flow and faster response in larger pneumatic circuits.
AC2000-02
ac aw series
A compact filter-regulator-lubricator combination with a 1/4 in port for standard pneumatic systems.
AW3000-03
ac aw series
A 3/8 in filter regulator with 5 μm filtration and stable pressure control.
PC8-02
pc pl series
A straight push-in fitting for 8 mm tubing and 1/4 in threads, designed for fast and reliable installation.
PL8-02
pc pl series
A 90-degree push-in fitting for 8 mm tubing and 1/4 in threads where compact routing is important.
YAM-20
yam series
A 3/4 in oil mist separator for removing oil aerosol, water and fine particles from compressed air.
MHZ2
mhz2 series
A compact two-finger parallel gripper for precise part handling, assembly and automatic loading.
MHC2
mhc2 series
A standard angular gripper for parts that need open jaw clearance during loading and unloading.
MHY2
mhy2 series
A 180-degree angular gripper for applications that need wide, unobstructed jaw opening.
MHL2
mhl2 series
A wide-opening parallel gripper for larger workpieces and compact material-handling cells.
MHF2
mhf2 series
A low-profile pneumatic gripper for restricted machine spaces and lightweight automated handling.
MRHQ
mrhq series
A rotary gripper that combines component gripping and rotational positioning in one compact unit.
MHS2
mhs2 series
A round-body parallel gripper for flexible handling, assembly and general machine automation.
MHS3
mhs3 series
A long-stroke parallel gripper for wider workpiece access and varied component sizes.
MHS4
mhs4 series
A compact parallel gripper for dependable two-finger handling in automated machinery.
HFY
hfy series
A Y-type pneumatic gripper for centered part handling in compact automated mechanisms.
HFR
hfr series
A 180-degree angular gripper for wide-access part handling and fixture clearance.
MCHA
mcha series
A 30-degree angular gripper for controlled finger clearance in compact assembly equipment.
MXS
mxs series
A compact guided cylinder with cross-roller support for accurate linear motion and tooling guidance.
MXQ
mxq series
A guided cylinder with recirculating-ball support for stable, repeatable movement in automation equipment.
MXH
mxh series
A small guided cylinder for compact transfer, positioning and assembly machinery.
HFZ
hfz series
A guided pneumatic cylinder for stable parallel travel in fixtures and handling mechanisms.
HFK
hfk series
A guide-rod pneumatic cylinder for consistent linear movement in compact automation equipment.
HFZL / HFKL
hfzl hfkl series
Compact guided cylinder options for lightweight automation and fixture applications.
6SV100
6sv series
A size 100 directional solenoid valve for configurable pneumatic control circuits and manifold assemblies.
6SV200
6sv series
A size 200 directional solenoid valve for configurable pneumatic control circuits and manifold assemblies.
6SV300
6sv series
A size 300 directional solenoid valve for configurable pneumatic control circuits and manifold assemblies.
6SV400
6sv series
A size 400 directional solenoid valve for configurable pneumatic control circuits and manifold assemblies.
Vyhledat model
Use a model number or product family to find the right engineering record.
Náhled geometrie
Open the product page for interactive 3D preview and technical specifications.
Vyžádat chybějící formáty
If the file is not published yet, add it to an RFQ and tell us your required format.